Welded wire mesh

Welded wire mesh is typically used for filtration, sieving and fencing purposes. Welded wire mesh can be delivered by the meter in rolls, as flat panels or cut to size. They can also be delivered in frame, in filter housings, rolled to cylinder, in a cone, etc.

WestCoast Technique can supply a wide range of welded wire mesh in different apertures, wire thickness and materials and a lot of types on stock. A selction of our stocked variant can be seen at the bottom of the page.

Should you unexpectedly not find the right solution, feel free to contact us for a non-binding talk about your need at wct@wct.dk or call +45 76 12 33 66.

Categories: ,

Widely used in these industries:

  • Food production
  • Pharmaceutical industry
  • Medicinal industry
  • Powerplants, heat production, bioenergy
  • Oil and gas
  • Manufacturing of machinery and equipment
  • Packaging
  • Agriculture and plant production
  • Cocoa and coffee production

Welded wire mesh in all its simplicity consists of a net with metal wires that is spot welded in all joints. It gives the net high strength and a high degree of accuracy in mesh size and shape.

This type of mesh is available in many combinations of aperture and wire thickness. The mesh is either in rolls of 25-30 meters in length with a width of e.g. 1.0 meters or in panels of e.g. 1.0 x 2.0 meters (width x length). The thickness of the wire is decisive for whether the mesh can be rolled or not. In general welded wire mesh can be supplied with wire thicknesses from 0.5 mm up to 12.0 mm.

The aperture is usually square – but rectangular aperture can be custom-made. Apertures range from 4.0 mm and upwards.

WestCoast has plenty of possibilities to make custom-made solutions. For example:

  • Mesh cut to size to fit exactly in the machine or device that it's supposed to.
  • Mesh on a frame with flange/clasps for mounting purposes.
  • Rolled to a cylinder with a top and flange (Filter element)
  • Multi-layer filter unit where the welded wire mesh can act as a support for a finer wire mesh (Ensures that the finer wire mesh won’t collapse during use)
  • Baskets with handles.

Welded wire mesh is called several other things. It can be called spot welded mesh, Form F grid, rionet, etc.

WestCoast can deliver standard welded wire mesh from stock and/or with a short delivery time. We can also supply custom-made meshes where specific wishes and conditions require it. See our stocked variants and the expected delivery time.

  • Stainless steel AISI 304, 316, 316L, 316Ti etc.
  • Plain steel
  • Hot dip galvanized steel
  • Painted mild steel

We offer a variety of different finishes: Galvanizing, Electro polishing, Ultrasonic cleaning, Alkaline cleaning, Powder coating.

Welded wire mesh is often used as protection against mice and rats in houses, cottages, sheds or foundations.

The tasks within this area may vary, so different alternatives may be required depending on the exact use. Typically one of the following alternatives is used.

Item no. Materials Mesh C/C Aperture Wire thickness Roll width
4108551001 Stainless steel 6,3 x 6,3 mm 5,5 x 5,5 mm 0,8 mm 1.0 meter and 1.2 meter
4110601000 Stainless steel 7,0 x 7,0 mm 6,0 x 6,0 mm 1,0 mm 1.0 meter
4110751010 Stainless steel 8,5 x 8,5 mm 7,5 x 7,5 mm 1,0 mm 1.0 meter

When ordering or inquiring we ask you to inform us:

  • Desired format (whole roll or cut to size)
  • Delivery address

Contact us to order or to receive a non-binding offer at +45 76 12 33 66 or wct@wct.dk.

See our many stocked variants below. Use the menu on the left to find the right alternative.

Related products